Silicone LED Strip Extrusion Production Line

LED soft light with silica gel extruder is the gen xin company\'s new products, once out of thousands of meters out more standard size, high efficiency, products with high survival rate and the mass customers love, out of range with LED lights, neon tube, silicone tube, medical tube, wire, wire and cable, sealing strip, and so on, welcome to come to consult.

LED silicone co-extrusion light band is a silicone material lamp with full package, is silica gel and lamp to bring through extruder extrusion together at the same time, relative to the epoxy potting glue lamp belt, PU glue potting lamp tape, liquid silicone potting lamp with this series lamp belt has the following distinctive features:

1. The color temperature drift is smaller, which can ensure that the sealant is not different from the original color temperature and the consistency of color temperature is very good.
2. This product is designed for outer arc hollow-out. It is easy to solve the problem of color difference, better lighting Angle and easier to repair.
3. Because of the pressure of the lamp, the plug is integrated with the extrusion lamp belt, which has excellent water resistance and is not etched by water.
4. This product is extruded by silicon and lamp, which can be extruded thousands of meters at a time by molding the mold, and the extrusion size is more standard and efficient.
5. This product is heated and solidified, so the deep curing time is short and the shipment speed is fast.
6. Excellent transmittance and refractive index, which can minimize the light failure of the light source.
7, has excellent weather resistance, can guarantee the article lamp in relatively wide temperature range (- 40 ~ 220 ℃) and normal use of special environment such as underwater so as to make the article lamp using regional almost unlimited.
8. The acid and alkali salt is better. In the case of weak acid and weak alkali, the appearance of the lamp belt has no change and normal use.
9. With super strong uv resistance, it can ensure that the lamp can be used outdoors for a long time.
10. Excellent silica gel strength, which makes the lamp band\'s anti-rupture ability high in special environment.
11. The environmental protection level of collagen material is higher, and the colloids of this product are food-grade silica gel.
12. It is widely used in silicone tubes, silicone bars, neon lights, LED cannons, high-voltage lamp strips, and soft lamp bars to make your products more beautiful and beautiful.

LED soft lamp with silica gel extruder product parameters
1. Diameter of screw rod: 50mm
2. Length diameter ratio of screw rod: 12:1;Compression ratio 2.5:1
3. Gearbox: with the gearbox
4. Variable frequency motor: 7.5kw variable frequency motor
5. Inverter: control of Fuji converter;Infinitely adjustable-speed
6. Screw speed: 0-50 RPM
7. Machine head: LED special bag glue machine head and three sets of dies
8. Bottom of the machine: the bottom of the extruder is supported by wheels and feet

LED soft lamp with silicone extruder after-sales service
Zhongchuxin offers you automation solutions, equipment usage instructions, precautions, installation training, on-site maintenance and other services, and guaranteed free maintenance within one year (non-human factor)!